Twin Trac 2.5 & Twin Trac 2.5/316
Superior Stucco Reinforcing
Structalath Twin Trac is an innovative reinforcing lath that simplifies the attachment of lath to wood and steel studs.
Quick Actions:
Designed especially for commercial construction, Twin Trac has all the enhanced features of regular Structalath with the addition of eight secondary cold-rolled longitudinal wires that add strength to form a ‘track’ for convenient attachment. Twin Trac can be substituted wherever 2.5 metal lath has been specified. Structalath Twin Trac 2.5/316 is a reduced furr version that is used with 1/2″ stucco systems.
Find out more about Structa Wire here
FOR SALES AND TECHNICAL QUESTIONS:
- East Coast to Texas: (800) 543-7140
- West of Texas to California: (800) 887-4708
INNOVATIVE DESIGN
- Twin Trac is the only welded wire lath specifically designed to meet the challenges faced by commercial lathing contractors
- It is designed to provide easy attachment for both steel and wood-stud construction
- The innovative use of longitudinal wires create a series of eight 3/16″ spacing bands that act as a continuous washer. This design allows for the easy penetration of self-tapping screws, hand nails and a flat base for automatic staples, making application easier and faster
- Flat wires provide a pressure seal at the fastener point, reducing water leakage
- Twin Trac provides a minimum of 28 rugged furring points per square foot that ensure both superior embedment and crack resistance
Product Data & Ordering Information
| Product code | Description |
|---|---|
| Twin Trac 2.5 | Twin Trac 2.5# (1/4” Standard Furring) |
| Twin Trac 2.5/316 Furr | Twin Trac 2.5/316 “316” = 3/16” reduced furring for 1-coat stucco applications |
ECONOMICAL
- Twin Trac in rolls (compared with sheet) provides the most economical and cost-effective metal base for three-coat stucco commercial and residential construction projects
- It saves material at side and end laps, compared with metal lath sheets. The reduction of overlaps means fewer weak points, and therefore less shrinkage cracks
- The innovative design results in fewer callbacks
CONVENIENT
- Worker-friendly Twin Trac unwinds from the roll into the flat without curvature memory, making application easier
- Twin Trac provides convenient and simple installation
- Twin Trac is designed to minimize build-up at horizontal laps
- The product is easy to manage on a scaffold, reducing worker fatigue and increasing productivity and job satisfaction
